Grc network floor trunking type 1
Inorganic network floor is an environment-friendly floor formed by silicate, inorganic fiber, mineral fiber, quartz sand and other materials through high pressure, and each floor has its own threading hole. Galvanized base support at four corners of the floor, without beam system. The four corners of each floor are 90 degrees; Arc, four plates are combined to form a circle, and an iron nut is used to fix the pressure angle.
Floor specification：◆ 500×500×26mm
Inorganic silicate has a fairly good thermal barrier effect and is a permanent non combustible solid. When a 600 ℃ flame intensity is applied to one side of the floor, it takes 1h to transfer it to the other side. There is enough time to escape or rescue property. Inorganic silicate is insoluble in water. In case of water leakage, the floor will not affect the floor quality even if it is completely immersed in water, It can be used completely. When the deflection of inorganic floor is 3mm, the bearing capacity can reach 430KG. The main material of inorganic network floor is similar to that of the building, so its service life is the same as that of the building.
|
model |
size（mm） |
Concentrated load（KG） |
limit load（N） |
Uniform loadN/M2 |
Fire resistance |
|
WJ500-Q |
500x500x26mm |
≥ 280 |
≥ 10650 |
≥ 16500 |
A1 |
|
Raised floor surface |
Bottom support system |
|||||
|
|
|
|
|
|
|
|
Carpet series |
HPL series |
Homogeneous penetrating PVC series |
High abrasion resistant PVC series |
Ceramic series |
Multilayer solid wood series |
Bottom support system |